QSC SC-28 2 x 8 processor for QSC loudspeakers


Product Code:
Availability: In Stock
Price:
$1,357.80

Qty: - +
   - OR -   

QSC

SC-28

2 x 8 processor for QSC loudspeakers

New

More QSC products

 

                                                                           SC-28


2 x 8 processor for QSC loudspeakers


The SC28 is a 2 input, 8 output digital system controller containing pre-programmed tunings for QSC loudspeaker systems (see list of supported loudspeakers at right). In addition to the preset tunings, the SC28 also offers user-adjustable equalization and delay.


Audio inputs and outputs are via balanced, line-level, analog XLR connectors. Four outputs for each of the two inputs are provided for use with 2 or 3-way systems plus subwoofers. Simple to operate yet uncompromised in audio quality, the SC28 uses 48 kHz, 24-bit A/D and D/A conversion with 32-bit, floating point DSP for wide dynamic range and low distortion. Advanced DSP is capable of implementing tunings that incorporate IIR (Infinite Impulse Response) as well as FIR (Finite Impulse Response) filters.

QSC system engineers have employed the power of the SC28's FIR (finite impulse response) filters to implement "Intrinsic Correction™" of the loudspeaker. The goal of Intrinsic Correction™ is to provide a drive signal to the amplifiers and loudspeakers that will result in the most accurate acoustical magnitude, frequency and phase domain performance possible. When properly implemented, Intrinsic Correction™can compensate for many causal phenomena such as the effects of waveguide acoustical impedance and loudspeaker cone resonance. The result is a loudspeaker system with excellent power response and extremely natural, uncolored sound across its frequency band and coverage area. An array of loudspeakers with Intrinsic Correction™ tunings will also be very responsive to the use of equalization to compensate for array configuration, acoustical conditions or user preferences.

Selection of tunings is accomplished by simply scrolling through a list of QSC loudspeakers and selecting the configuration on the LCD panel. A similar process is used to select the QSC amplifiers being used and to configure amplifier input sensitivity for proper dynamic protection gain structure. Settings for new QSC products may be loaded into the SC28 via a rear-mounted USB port.

Once the processor settings have been matched to the system, the user or installer can take advantage of an integral, 6 band parametric equalizer, high and low shelving filters and signal delay to optimize for acoustic, environmental or aesthetic considerations. Password protection is included to prevent unauthorized tampering. The SC28 is easy to use and delivers superb audio performance at a very affordable price.

SPECIFICATIONS SC28 System Controller
Dynamic Range
Unweighted
A weighted
(AES-17, -60 dB Method, all sensitivities)

> 104dB
> 107dB
Input Impedance
Unbalanced (nominal)
Balanced (nominal)

69k ohms
11k ohms
Common Mode Rejection
20 Hz - 20 kHz (min)
20 Hz - 20 kHz (typ)

> 75 dB
> 80 dB
Input Sensitivities Vrms: 1.5V, 3V, 9V, 18V
dBU: 5.7, 11.8, 21.3, 27.3
dBV: 3.5, 9.5, 19.1, 25.1
Distortion
+4 dBu
2 dB below clip (max)
(AES-17, 20 Hz - 20 kHz, all sensitivities)

< 0.006 THD+N
< 0.006 THD+N
Crosstalk (20 Hz – 20 kHz)
Inter-channel (max)

> 75 dB
Frequency Response +/- 0.1dB from target response
Audio Converters 24 bit, 48k Hz
Mute Infinite Attenuation
Throughput Delay 1.4125 milliseconds (A/D – DSP - D/A)
Program Inputs
Connector Type
Type
Grounding
Pinout
2
XLR female, locking
Electronically balanced
All shield terminals connected to chassis
1: (GND) 2: (+), 3: (-)
Program Outputs
Connector Type
Type
Grounding
Pinout
8
XLR male
Electronically balanced
All shield terminals connected to chassis
1: (GND) 2: (+), 3: (-)
Controls Rotary encoder knob with push-to-select function
Indicators
Power
LCD Data Display
Input/Output Meters

Blue, front panel
2 lines 16 character, backlit, front panel
Green, Yellow, Red, front panel
USB Port USB type “B”
AC Power Requirements 100-240 VAC, 50-60 Hz, no user adjustment required
AC Power Connection IEC-type inlet
AC Power Cord 2 meters long, #18AWG
Dimensions 1.73"H x 18.94"W x 6.67"D
(44 mm x 481 mm x 169 mm)
1 Rack Unit
Weight 4.5 lbs / 2 kg


Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
supreme

supremeauctiononlinesoftware.widgets.EbayGalleryZ.swf

supremeauctiononlinesoftware.widgets.GalleryBasicFree.swf

supremeauctiononlinesoftware.widgets.GalleryCat.swf

supremeauctiononlinesoftware.widgets.FeedbackWidgetBasicFree.swf